Differences between Beats Pro and Beats Studio
Contents
Beats Pro and Beats Studio[edit]
The Beats Pro and Beats Studio are two lines of high-fidelity headphones developed by Beats Electronics, a subsidiary of Apple Inc. The Beats Studio was the first product released by the company in 2008, designed for the general consumer market with a focus on portable use. The Beats Pro was released in 2010 as a heavy-duty alternative intended for professional audio engineers, producers, and disc jockeys.
Comparison table[edit]
| Feature | Beats Pro | Beats Studio (Studio 3/Pro) |
|---|---|---|
| Primary material | Aluminum | Plastic and synthetic rubber |
| Noise management | Passive isolation | Active Noise Cancellation (ANC) |
| Power requirement | Passive (No battery needed) | Active (Internal rechargeable battery) |
| Foldability | Flip-up ear cups | Collapsible hinges |
| Weight | 400 grams | 260 grams |
| Connectivity | Wired only (Dual 3.5mm ports) | Wireless (Bluetooth) and wired |
| Target market | Professional/Studio | Consumer/Travel |
Design and construction[edit]
The physical build of the two models differs based on their intended use cases. The Beats Pro is constructed with an aluminum frame and leather ear cushions, omitting the plastic hinges found on consumer models to increase durability. It features a "flip-up" ear cup design, which allows users to monitor room audio without removing the headband. This model weighs approximately 400 grams, making it heavier than most consumer headphones in the Beats lineup.
The Beats Studio series, including the Studio 2, Studio 3, and the 2023 Studio Pro, utilizes a primarily plastic construction with a foldable headband for portability. While the original 2008 model used AAA batteries, modern versions utilize integrated lithium-ion batteries. The Studio series weighs approximately 260 grams, which is lighter than the Pro model.
Audio and noise technology[edit]
The two models utilize different methods for noise reduction. The Beats Studio uses Active Noise Cancellation (ANC), a technology that employs internal microphones to measure ambient noise and generate an inverse signal to cancel it out. This system requires a constant power source; consequently, these headphones cannot function if the battery is depleted.
The Beats Pro relies on passive noise isolation. The design uses thick, high-density foam ear cushions to create a physical seal around the ear. Because it lacks electronic noise cancellation circuitry, the Beats Pro operates as a passive device and does not require batteries or charging to play audio.
Connectivity and features[edit]
The Beats Pro includes two 3.5mm input/output ports, one on each ear cup. This allows for "daisy-chaining," where a second pair of headphones can be plugged into the Beats Pro to share the audio source. The cable typically includes a threaded 1/4-inch adapter for use with professional mixing boards.
The Beats Studio line transitioned to wireless connectivity with the release of the Studio Wireless. Modern versions incorporate Apple-designed silicon, such as the W1 or H1 chips, to facilitate faster pairing with iOS devices and support for spatial audio. While the Studio line includes a 3.5mm jack for wired use, its primary function is via Bluetooth.
References[edit]
1. "Beats Pro Headphones Review." CNET. Published October 20, 2010. 2. "Beats Studio3 Wireless Review." PCMag. Published January 11, 2018. 3. "Beats Studio Pro vs Beats Studio3 Wireless." SoundGuys. Published July 25, 2023. 4. Product Specifications: Beats Pro Professional Headphones. Beats by Dre. 2012 Archive.
